E62-433T20D 2km 4 Data Nrf24l01 Transmitter 8km 433mhz Receiver 24ghz Wireless Transceiver Rf Module

[Frequency]:425~450.5MHz

[Power]:10~20dBm

[Distance]:1.0km

[Interface]:UART

[Weight]:6.5±0.1g

[Introduction]:E62 series are full duplex wireless transceiver modules (UART interface),operating at 425-450MHz.

Specification

Parameters

RF Parameter Value Remark
Working frequency 425~450.5 MHz Default:  433MHz
Transmitting power 10~20 dBm Default:  20dBm(About 100mW)
Receiving sensitivity -106 dBm Air data rate: 64kbps
Air data rate 16k~128kbps Default: 64kbps
Test distance 1000m In open and clear air, with maximum power, 5dBi antenna gain, height of 2m,

air data rate: 64kbps

Hardware Parameter Value Remark
Size 21 * 36 mm Without SMA
Antenna type SMA-K
Communication interface UART Baud rate: 1200~115200, default: 9600
Package DIP
Buffer 512  bytes buffer Internal Real-time Logical Subpacking
Electronic parameter Min. Typ. Max. Unit Condition
Power supply 2.3 5.0 5.5 V
Communication level 2.5 3.3 3.6 V
Transmitting current 96 104 114 mA 20dBm(100mW)
Receiving current 30 33 36 mA
Sleep current 3 4 5 μA
Operating temperature -40 20 +85
Operating humidity 10 60 90 %
Storage temperature -40 20 +125

Pin Definition

Pin No. Pin Item Pin Direction Pin Application
1 M0 Input(weak pull-up)     Work with M1 & decide the four operating modes. Floating is not allowed, can be ground.
2 M1 Input(weak pull-up)     Work with M0 & decide the four operating modes. Floating is not allowed, can be ground.
3 RXD Input     TTL UART inputs, connects to external TXD (MCU, PC) output pin.Can be configured as open-drain or pull-up input
4 TXD Output     TTL UART outputs, connects to external RXD (MCU, PC) input pin.Can be configured as open-drain or push-pull output
5 AUX Output     To wake up the external MCU, during the procedure of self-check initialization, the pinoutputs low level. Can be configured as open-drain output or push-pull output (floating is allowed).
6 VCC Input     Power supply 2.3V-5.2V DC
7 GND Input     Ground
8 Fixing hole     Fixing hole
9 Fixing hole     Fixing hole
10 Fixing hole     Fixing hole

 

滚动至顶部